Telestream PRISM MPI, Руководство пользователя

Страница: 44 / 304

Getting Started
MPX Rear Panel Connectors
PRISM MPI-MPX User Manual
44
8 SDI
SFP+ 2-1
Two optional SFP outputs for SDI signals. SDI SFP inputs 1 and 2
support HD/3G signals.
9 SDI I/O Four BNC inputs can operate in these modes:
•
SDI inputs 1 and 3 support SD/HD/3G/12G signals. SDI inputs 2
and 4 support SD/HD/3G signals.
•
Single SDI link (Option MP2-FMT-4K is required for 12G support).
When used as a single link, only one of the SDI 1-4 inputs is active
at a time.
•
Eye diagram up to 12G on SDI input 1 only for physical layer
measurements, including automated measurement of 12G-SDI
eye pattern parameters (requires Options MP2-FMT-4K and MPX2
PHY).
•
Quad 4K links when used in conjunction with the SDI 1-4 inputs
(Option MP2-FMT-4K only). When used as Quad 4K links, all four
SDI inputs are active.
10 PPS PPS connector outputs a 1 PPS (pulse per second) signal when the
instrument is locked to a PTP reference. 3.3v drive. TTL compatible.
11 LTC/GPIO 15-pin, D-type connector for future functionality.
12 REF IN – OUT REF IN is used for analog reference signals black burst and tri-level
sync for locking. REF OUT is a pass through of the REF IN.
13 Audio input port is for future use.
14 Audio output (1/8-inch—3.5mm—line out) port is for headphones
to listen to the selected audio channel pair.
2
15 Microphone input port is for future use.
Descriptions of numbered PRISM MPX rear-panel connectors
Item
number
Connector label,
symbol, or end Description