Telestream PRISM MPI, Руководство пользователя

Страница: 73 / 304

Methods of Operation
Remote Control through API Commands
73
PRISM MPI-MPX User Manual
3.
Fill in Syslog Server Address with the IP address of the computer running the syslog
server software.
4.
Fill in Syslog Server Port with the number configured in the syslog server software.
Note:
For questions on configuring your syslog server software, contact your system
admin.
5. Select Save .
The syslog server software collects events and alarms, and displays the details.
SNMP Traps
PRISM supports SNMP only for alarms (traps). PRISM supports a single trap prefix
(prismTrap), which can be seen in the Video signal lost sample. The SNMP configuration
is created through the RESTful API.
•
The alarm is identified in the SNMP trap payload.
•
The PRISM SNMP MIB is provided in the file prism_mon.mib file, which can be
downloaded from the PRISM web page.
•
SNMP trap destination address is set with RESTful API using post operation,
through Postman or a similar application.
•
The alarms generated in the PRISM are sent to the destination trap receiver as
SNMP trap.
•
Users must have a trap receiver running on the destination machine and the IP
address of the PRISM (snmpAgent) need to be configured on the destination.
Enable SNMP Traps
Note:
To open the PRISM help page, go to
http://IpAddress/api/help
(replace
“IpAddress” with your PRISM IP address).
Note: To set the SNMP_TRAP_ENABLE_ON you need an API development application,
such as Postman.
1.
In a PRISM open an API development application, such as Postman.
•
GET and POST are allowed commands.
•
In these examples, replace "xxx.xxx.xxx.xxx" with the IP address of the PRISM the
sending the traps and "yyy.yyy.yyy.yyy" with the IP address of the computer
receiving the traps.