Telestream PRISM MPI, Руководство пользователя

Страница: 153 / 304

Application Information
Waveform Application
153
PRISM MPI-MPX User Manual
Filter
Select one of the buttons to set the waveform filter. This is useful for isolating a specific
characteristic of the input. For example, you may enable a Low Pass filter for quick
camera exposure setting.
These filters are available:
•
Flat: Display with the full available bandwidth.
•
Low Pass: Display only the low frequency part of the signal.
Graticule
Select the drop-down menu to choose a vertical scale value.
Note:
The Code Value vertical unit is a hex value. The Stop, Reflectance, and Nits scale
are drawn differently depending on the gamma setting in the input menu.
Convert to Rec. 709
Move this slider to On to allow the trace displays to convert the Gamma and Color
Gamut settings for the signal to SDR Narrow and BT. 709 (requires Option MP2-PROD).
Note:
Conversion to Rec. 709 automatically converts to BT.709, otherwise the graticule
selection must be manually changed. (See
Configure Instrument for HDR/WCG
Monitoring
.) Conversion to Rec. 709 mode is not supported for SD signals.
Line Select
Move the slider to On to select 1 Line or Off to select All Lines.
If Line Select is set to
On
(Line Select: Line 1), the display only shows results for the
selected line in the picture. The line can be selected using the on-screen tools; see
Line
Select Function
. Or the line can be selected directly on the Picture.
Show Active Area Only
Turn this on to remove the trace of vertical / horizontal blanking data.
Gain
Select from the options to set to x1, x2, x5, or x10.
Magnification
Select from the options to set to the magnification to Best View, x1, x10, x20, x25, or
x50.