Telestream PRISM MPI, Руководство пользователя

Страница: 41 / 304

Getting Started
MPI Rear Panel Connectors
41
PRISM MPI-MPX User Manual
3 SDI SFP+ Two optional SFP outputs are for SDI signals (HD-BNC transmitter
SFP modules shown). SDI SFP outputs 3 and 4 supports HD/3G
signals.
4 10GbE
SFP+
Two optional SFP ports are for 10GbE Ethernet applications.
5 SDI OUT SDI output of the selected SDI or IP input.
6 LTC/GPIO 15-pin, D-type connector for future functionality.
7 PPS PPS connector outputs a 1 PPS (pulse per second) signal when the
instrument is locked to a PTP reference. 3.3v drive. TTL
compatible.
8 REF IN – OUT REF IN is used for analog reference signals black burst and tri-level
sync for locking. REF OUT is a pass through of the REF IN.
9 Connector for an AC power source.
10 DP Two Display Port outputs are for external monitors. The output
video format is 1920×1080.
1
Note: An MPI can use a maximum of 1 external display, DP or
HDMI.
11 HDMI HDMI port output is for an external monitor. The output video
format is 1920×1080.
1
Note:
An MPI can use a maximum of 1 external display, DP or
HDMI.
13 Two USB 3.0 ports are for connecting a mouse and keyboard,
importing or exporting instrument presets, upgrading the
instrument firmware, or saving screen and stream captures.
14 Two USB 3.0 ports are for connecting a mouse and keyboard,
importing or exporting instrument presets, upgrading the
instrument firmware, or saving screen and stream captures.
15 SERIAL Serial interface, 9-pin connector, is not used.
Descriptions of numbered PRISM MPI rear-panel connectors
Item
number
Connector label,
symbol, or end Description