manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 98 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 98

3

Setup Categories

3-56

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

The current time is shown in a 24-hour HH:MM
(hour:minute) format.

3.6.29 Date

Use the Date item to set the test instrument’s internal
calendar.  The Date setting is used in the time and date
stamp that appears on all Prints and is displayed in the Date
result.

Below is an example showing the format of the Date item.

Date    15/FEB/1994

The current date is shown in the DD/MMM/YYYY
(day/month/year) format.

3.6.30 Memory Clear?

Use the Memory Clear? item to reset all battery-backed
memory locations to their factory default configurations.

CAUTION:

Memory Clear permanently erases stored
programs and setups.  Be careful using the
Memory Clear feature because it
permanently erases from memory all
programs, results, and Prints that have been
stored.

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов