manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 259 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 259

D-1

D

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

Understanding G.821 Performance Analysis

UNDERSTANDING G.821

PERFORMANCE ANALYSIS

D.1

WHY CCITT G.821 PERFORMANCE
ANALYSIS?

This appendix discusses the criteria for performance
analysis, the concept of available time versus unavailable
time, and degraded minutes as specified in CCITT
Recommendation G.821.  This discussion is provided to
familiarize users with the G.821 Performance results.

D.2

PERFORMANCE ANALYSIS
RESULTS

The performance results (available in the INTERCEPTOR
147’s PERFORMANCE results category) are derived by
observing the received bit error counts and received bit
counts at 1-second intervals, and classifying each 1-
second interval as available, unavailable, severely errored,
or error free seconds.  This division of test time is illustrated
in Figure D-1.  Further calculations yield the number and
percentage of degraded minutes, and percentages of
available, severely errored, and error free seconds.

Figure D-1

Division of Test Seconds for Performance

Analysis

AVAILABLE SECONDS

NON-SEVERELY

ERRORED
SECONDS

SEVERELY

ERRORED
SECONDS

UNAVAILABLE SECONDS

TOTAL TEST TIME

FROM INITIAL SYNCHRONIZATION

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов