manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 70 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 70

3

Setup Categories

3-28

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

The format of the Data Lead item is shown below.

Data Lead

RTS

ON

The following Data Leads can be set, as appropriate for the
given interface and configuration:  RTS, LL, RL, DTR,
CTS, TM, RLSD, DSR, RS, CS, TR, RR, or DM.  Each
lead can be set ON or OFF.

In X.21 mode, the C lead is set by toggling the RS data lead
and the I lead is set by toggling the CS lead.

3.3.31 Gen Clk

Use the Gen Clk (Generate Clock) item to select the clock
source used for data interface testing.

INTRNL

When Gen Clk is set to INTRNL (Internal), the
transmit timing source is obtained from the
INTERCEPTOR 147’s internal clock.

INTF

When Gen Clk is set to INTF (Interface), the transmit
timing source is obtained from the received signal/
clock.

3.4

TIMESLOTS CATEGORY

Use the TIMESLOTS category to select the timeslot (or
timeslots) you want to test or analyze.  The TIMESLOTS
category is used only when you need to select individual
timeslots in a 2 Mbit/s signal. Therefore, the TIMESLOTS
category is not available when Test is set to DATA or
when Test Mode is set to 2048K.

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов