manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 198 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 198

Applications

7-18

7

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

3.

Set the CONFIGURATION category items

Set Transmitter to ON.
Set Framing to the format used by the 2048 kbit/
s link under test (or set Framing to AUTO).
Set Tx Clock to 2M REF.

4.

Check AUXILIARY category items

If you are using a printer, set all printer-related
setup items as desired.  (For more information,
see Section 5).  Check the Time and Date items
to verify they are set for the current time and date.

5.

Set RECEIVER control to MON

Press the RECEIVER control to select MON
(when working from a resistor-isolated monitor
jack), and to select 120

Ω

 or 75

Ω

, as appropriate.

6.

Set the CONFIGURATION category items

Set Tx Clock to 2M REF.
Set 2M Ref Input to MON, BRIDGE, or TERM
(as appropriate).

7.

Connect to the RECEIVER connector

Using the selected RECEIVER connector,
connect the test instrument to the receive direction
of the circuit that is being tested.

8.

Connect to the EXT CLOCK connector

Using the EXT CLOCK 2M REF BNC connector,
connect the test instrument to the circuit’s 2M
clock reference.

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов