manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 97 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 97

3-55

3

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

Setup Categories

M.2100

Select M.2100 to use the CCITT Recommendation
M.2100 performance analysis standard.

3.6.26 Beeper

Use the Beeper item to turn the beeper ON or OFF.

When set to ON, the beeper beeps when you are viewing
the SUMMARY Results category and there is a change in
one of the items in the SUMMARY Results category.

3.6.27 FAS Results

Use the FAS Results item to specify whether you want the
FAS Errors result to be based on FAS bit errors or FAS
word errors.  The following selections are available for
FAS Results.

BIT

When based on FAS bit errors, one FAS error is
counted for every bit that is in error in a FAS word.

WORD

When based on FAS word errors, one FAS error is
counted when one or more errors occur in a FAS
word.

3.6.28 Time

Use the Time item to set the test instrument’s internal time
of day clock.  The Time setting is used in the time and date
stamp that appears on all Prints and is displayed in the
Time result.

The format of the Time item follows.

Time

    15:58

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов