manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 173 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 173

6-45

6

Remote Control

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

2M Reference Input Option Not Installed.

This error message is caused by requesting the bit slips
results when Option 147-1 is not installed.  You may
receive this message in response when you send the
following query:  res:bits?

Argument out of Range.

This error message is caused by sending a value that is
invalid for the associated register.  You may receive this
message in response when you send the following
commands:  *ese, *sre, status:line_en, status:alrm_en,
status:test_en.

Bitstring Too Long.

This error message is caused by sending a bit string with
too many bits (for example, sending 9 bits instead of
sending 8 bits).  You may receive this message in response
when you send one of the SET: commands.

Bitstring Too Short.

This error message is caused by sending a bit string with
too few bits (for example, sending 3 bits instead of sending
8 bits).  You may receive this message in response when
you send one of the SET: commands.

Cannot Set Length - Auto Mode Enabled.

This error message is caused by sending a length value
when length is set to AUTO.  You may receive this
message in response when you send the following
command:  set:hstl.

Incorrectly Formed Histogram Length.

This error message is caused by sending a histogram
length that is not in the “DD/HH:MM” format.  You may
receive this message in response when you send the
following command:  set:hstl.

Incorrectly Formed Histogram Start Time.

This error message is caused by sending a Histogram Start
Time that is not in the “DD/HH:MM” format.  You may
receive this message in response when you send the
following commands:  set:hsts.

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов