manualshive.com logo in svg

Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 137 / 280

Поделиться
Скачать
Telecommunications Techniques Corporation interceptor 147 Скачать руководство пользователя страница 137

6-9

6

Remote Control

INTERCEPTOR 147 2 Mbit/s and Data Analyzer

*OPT?

Option Identification

query only

The *OPT? query requests which options are installed in
the INTERCEPTOR 147.  A “0” represents an option that
is not installed.  If no options are installed, a series of seven
0’s is returned.  An installed option is represented by its
name.

NOTE:

As new options and capabilities are developed,
the number of elements in the response will
almost certainly change in future software
versions.  However, the order and positions of the
currently defined options will not change.

Example:

>*

OPT?

Requests the list of currently installed
options.

DELTA_PPM, 2M_REF, 0, 0, 0, 0, 0

*PRE [<int> | ?]

Parallel Poll Enable Register

command/query

Use the *PRE command to set the IST message of the
INTERCEPTOR 147.

The *PRE? query requests the contents of the Parallel Poll
Enable Register.  The value returned is the weight of all
bits that are set at the time you read the byte.  The Parallel
Poll Enable Register is cleared after it is read.

The act of reading the Parallel Poll Enable Register sets
the IST message.

Содержание interceptor 147

























































































































































































































































































Отзывы:

Нет отзывов