Telecommunications Techniques Corporation interceptor 147, Справочное руководство, Страница: 85 / 280

3-43
3
INTERCEPTOR 147 2 Mbit/s and Data Analyzer
Setup Categories
SIGNAL
Select SIGNAL for Signaling Summary prints which
contain a record of up to 250 of the most recent
signaling bit changes detected since the beginning of
the current test. (The signaling bits are contained in
Timeslot 16 of a 2 Mbit/s signal.) For a sample Print,
see Section 5, Using a Printer.
3.6.8 Auto Print
Use the Auto Print (Automatic Print) item to enable or
disable automatic Prints. The selections listed below are
available.
OFF
Disables all automatic Prints.
TIMED
Enables Timed Results Prints. The type of Results
Print depends on the selection in the Result Print item.
The time interval between Prints depends on the
selection in the Time Interval item.
NOTE: When a Timed Results Print prints out, the
Print is labeled “TIMED” (instead of
“RESULTS”).
EVENT
Enables Event Prints. Then an Event Print is generated
whenever one or more of the event types (selected in
the Event item) occur.