TelcoBridges TSBC3000, Руководство по установке

Страница: 53 / 60

47
Initial System Configuration
3.2.1.1 Connecting to the USB Port of the TSBC3000 Series
The Type B USB serial port interface enables administrators to perform management tasks on the
TSBC3000 series session border controller.
Note
The USB cable is not provided.
To connect to the Type B USB serial port:
1. Connect the Type A USB connector of the USB cable to a computer.
2. Connect the Type B USB connector of the USB cable to the USB port of the TSBC3000 series
session border controller.
Figure 3.2 USB cable connection
3.2.1.2 Connecting to the Serial Port of the TSBC3000 Series
Note
The default IP addresses for the management ports are located in the “Important Notice”
sheet received with the shipment. For the TSBC3000-680, MGMT ports are configured in
bonding.
If you do not know the default IP address, go to Section 3.5 “Changing the TSBC3000
Series Management Port IP Address” on page 49.
The serial port interface enables administrators to perform management tasks on the TSBC3000 series
session border controller.
To connect to the serial port of a TSBC3000 series:
1. Connect one end of a CAT5 RJ-45 (male-male) cable to the
T
sbc serial adapter (both supplied with
unit). Connect the DB9 to RJ-45 to the serial port of the computer and the other end of the CAT5
To Computer
T
sbc