TelcoBridges TSBC3000, Руководство по установке

Страница: 16 / 60

TSBC3000 Series Standalone and TSBC3000 Series 1+1 System Installation Guide
10
2.2.3 Installing the TSBC3000 Series Standalone and the TSBC3000
Series 1+1 on an Equipment Rack
Both the TSBC3000 series standalone and the TSBC3000 series 1+1 system are mounted on the 19"
equipment rack using the angle brackets and screws provided in the box.
Mounting the TSBC3000 Series Standalone:
1. Using four metal screws, attach one angle bracket to the front, left-hand side of the TSBC3000
series unit, as shown in figure 2.1 on page 11. Do the same for the angle bracket on the right-hand
side.
2. Start mounting equipment at the top-most position of the rack, keeping in mind the space required
on the equipment rack as described in Section 2.2.2 “Vertical Placement of the Equipment” on
page 9.
Mounting the TSBC3000 Series 1+1 System:
1. Mount the TSBC3000 series unit as mentioned above.
2. Install the TSBC3000 1 unit below the TSBC3000 series unit, as shown in figure 2.1 on
page 11.
3. To attach the TSBC3000 1 unit to the equipment rack, follow the previous procedure.
4. Install one or two patch panels below the TSBC3000 1 unit, as shown in figure 2.1 on
page 11 (Optional TDM fall-back feature).