TelcoBridges TSBC3000, Руководство по установке

Страница: 40 / 60

TSBC3000 Series Standalone and TSBC3000 Series 1+1 System Installation Guide
34
2.6 Adding a T1 Unit to an Existing Standalone;
Creating a TSBC3000 series 1+1 System
Warning:
This procedure will require some system downtime.
In order to add a TSBC3000 1 unit to a TSBC3000 series standalone unit, you must perform the
following procedures:
• Section 2.6.1 “Reconfigure a Standalone Unit as a Primary Unit in a TSBC3000 Series 1+1
System”
• Section 2.6.2 “Install the TSBC3000 1 unit on the Equipment Rack”
• Section 2.6.3 “Install the 1+1 Patch Panel”
• Section 2.6.4 “Connect to the TSBC3000 Series 1+1 Management Interface”
• Section 2.6.5 “Connect to the TSBC3000 Series 1+1 Control Network”
• Section 2.6.6 “Connect to the TSBC3000 Series 1+1 VoIP Network(s)”
• Section 2.6.7 “Connect to the PSTN Network”
• Section 2.6.9 “Power Up the Equipment”
• Section 2.6.10 “Start Up”
2.6.1 Reconfigure a Standalone Unit as a Primary Unit in a TSBC3000
Series 1+1 System
1. Connect to the web portal of the standalone TSBC3000 series unit.
2. Select Hosts from the navigation panel.