TelcoBridges TSBC3000, Руководство по установке

Страница: 28 / 60

TSBC3000 Series Standalone and TSBC3000 Series 1+1 System Installation Guide
22
2.5.1 Connecting to the TSBC3000 Series 1+1 System Management
Interfaces
The TSBC3000 series provides redundant management interfaces enabling administrators to perform
management tasks on the TSBC3000 series 1+1 system.
Prerequisites
To communicate with the management interface, the following is needed:
• Two or four CAT5 Ethernet cables with RJ45 male-male terminations.
Interconnections
A TSBC3000 series 1+1 system provides redundant management interfaces for a TSBC3000 series
and an T1 session border controller, each using a gigabit Ethernet network link. See
figure 2.8 on page 23.
TSBC3000-680
To communicate with the management interface:
1. Connect a CAT5 Ethernet cable to the port labeled MGMT0 at the rear of the TSBC3000 series to
the first gigabit Ethernet switch.
2. If your system employs a second Gigabit Ethernet switch for redundancy, connect a second CAT5
Ethernet cable to MGMT1 at the rear of the TSBC3000 series. Connect the other end of the same
CAT5 cable to a second gigabit Ethernet switch.
3. Repeat steps 1 and 2 for the TSBC3000 1 unit.
TSBC3000-2700
To communicate with the management interface:
1. Connect a CAT5 Ethernet cable to the port labeled MGMT0 at the rear of the TSBC3000 series to
the first gigabit Ethernet switch.
2. Repeat steps 1 and 2 for the TSBC3000 1 unit.