TelcoBridges TSBC3000, Руководство по установке

Страница: 54 / 60

TSBC3000 Series Standalone and TSBC3000 Series 1+1 System Installation Guide
48
RJ-45 (male-male) cable to the serial port (labeled 10101) of the TSBC3000 series. See
Section A.2 on page 54 for a RJ-45 pin-out description.
2. If your computer’s serial port features a DB9 connector connect directly otherwise use the
T
sbc
serial adapter supplied with your TSBC3000 series. If your computer's serial port features a USB
connector, you will need to provide a USB to DB9 adapter. Refer to figure
3.3 on page 48.
Figure 3.3 Conceptual View of a Serial Connection from the TSBC3000 Series to a Computer
3.2.2 Configuring the Terminal Emulator Application
Before communicating with the management interface, you must first configure a terminal emulator or
console application to communicate with the TSBC3000 Series system in order to configure initial
settings. Available terminal emulation software includes:
• HyperTerminal
• Putty
• Minicom
To configure the terminal emulator application:
1. Set the baud rate (bits per second) to 9600
2. Set the data rate to 8 bits
3. Set the parity to None
4. Set the stop bits to 1
5. Set the flow control to None
Note
See Section 3.5 on page 49 to learn how to change the IP address of the MGMT0 port.
Strai g ht
Ethernet
Cable
T
sbc
Serial
Adapter
DB9 to
USB Device To Computer
T
sbc