TelcoBridges TSBC3000, Руководство по установке

Страница: 10 / 60

TSBC3000 Series Standalone and TSBC3000 Series 1+1 System Installation Guide
4
1.3 Preventing Electrostatic Discharge Damage
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. This may occur if
electronic printed circuit cards are improperly handled and may cause complete or intermittent failure.
Always follow ESD prevention procedures when removing and replacing modules:
• Ensure that the equipment is grounded.
• Wear an ESD-preventive wrist strap and ensure that it makes good contact with your
skin. Connect the wrist strap clip to an unpainted surface of the equipment or the
grounded equipment rack in order to channel away all ESD voltage safely to ground.
To guard against ESD damage and shocks, the wrist strap and cord must be in proper
working condition.
• If no wrist strap is available, and you must work with the equipment, ground yourself
by touching a metal part of the chassis.
1.4 Recommended Reading
This document is written with the assumption that you have a clear understanding of the installation of
the equipment described in this document and you are trained to work with the equipment. If you have
any technical questions, TelcoBridges TB Support (technical support team) can be reached at the
following numbers, or an email can be sent to:
support@telcobridges.com .
• Americas & Europe Technical Support Centre (GMT-05:00, Montreal):
Telephone: +1-450-655-8993 x131 or x102
• Asia Technical Support Centre (GMT +08:00, Hong Kong)
Telephone: +852-3749-9818
• 24/7 International Support
Telephone: +1-866-438-4703
Documents exploring various aspects of the product are available on the TB Wiki:
http://docs.telcobridges.com
!
W arnin g