TelcoBridges TSBC3000, Руководство по установке

Страница: 9 / 60

3
Introduction
1.2 Installation Prerequisites
For the installation to proceed without interruption, it is important that you have all necessary materials
on hand.
TSBC3000 Series Standalone TSBC3000 Series 1+1 System
Adequate space for the installation of the
TSBC3000 series standalone.
You will need to mount the TSBC3000 series
unit on a 19" equipment rack (customer
provided). Your TSBC3000 series unit is a 1U
unit.
Adequate space for the installation of the
TSBC3000 series 1+1 system.
You will need to mount the TSBC3000 series
1+1 system on a 19" equipment rack (customer
provided).
The 1+1 System requires space for the
following number of units:
Adequate power supply and power
connections.
The TSBC3000 series unit requires two power
connections. To guarantee an uninterrupted
supply of electricity, each power connection must
be fed by a dedicated power source.
IP addresses for the management ports.
To avoid delays, you should have the IP
address, netmask and session border controller
addresses on hand. Take note that the
management port supports DHCP, see
Section 2.4.1 “Connecting to the TSBC3000
Series Management Interface” on page 14 for
further information.
TSBC3000 series Unit:
TSBC3000 1 Unit:
Total
Optional TDM fall-back 1+1
Patch Panel(s)
One patch panel for 8 PRI
trunks or two patch panels for
16 PRI trunks:
Total: 1U
1U
2U
0U to 2U
2U to 4U
Adequate power supply and power
connections.
The TSBC3000 series and TSBC3000 series
+1 units require two power connections each.
To guarantee an uninterrupted supply of
electricity, each power connection must be fed
by a dedicated power source.
IP addresses for the management ports.
To avoid delays, you should have the IP
address, netmask and session border controller
addresses on hand. Take note that the
management port supports DHCP, see
Section
2.4.1 “Connecting to the TSBC3000
Series Management Interface” on page 14 for
further information.