TelcoBridges TSBC3000, Руководство по установке

Страница: 55 / 60

49
Initial System Configuration
3.3 Changing TSBC3000 Series Management Port Passwords
Note
The following procedure must be performed on a TSBC3000 series standalone and the
two units of a TSBC3000 series 1+1 system.
Once you are logged on to the TSBC3000 series, type “passwd”, to change the password being used.
The following information will be displayed:
[root@TB003540 ~]# passwd
Changing password for user root.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
3.4 Retrieving TSBC3000 Series Information
The TSBC3000 series enables you to retrieve system information with the following shell commands:
• tbproduct (retrieve the TSBC3000 series product type). See
http://docs.telcobridges.com/mediawiki/index.php/Get_Product_Type , for further information.
• tbserial (retrieve the TSBC3000 series serial number). See
http://docs.telcobridges.com/mediawiki/index.php/Get_Serial_Number , for further information.
3.5 Changing the TSBC3000 Series Management Port IP
Address
Note
The following procedure must be performed on a TSBC3000 series standalone unit and
the two units of a TSBC3000 series 1+1 system.
The management port of the TSBC3000 series (labeled MGMT0) is configured using a static IP address
by default, which is located on the “Important Notice” sheet. It can be modified using the following shell
script:
tbchangeip
Note
If you do not have the “Important Notice” sheet, the default IP address and netmask are
set as follows:
• IP address: 172.24.0.2
• Netmask: 255.255.255.0