Service Manual
1-13
General Information
1
Table 1-6. Electrical specifications
Characteristic
Specification
Primary line voltages
90 to 132 VAC (115 VAC nominal) 180 to 264 VAC (220 VAC
nominal) input voltage range is switch-selectable.
Primary voltage
frequency range
47 to 63 Hz
Power consumption
150 watts at idle. 600 during printing.
Current rating
115 VAC configuration – 9 amp max.
220 VAC configuration – 6 amp max.
Primary voltage fusing
115 VAC configuration – 15 amp
220 VAC configuration – 6.3 amp
Fuses are not user-accessible.
Secondary voltages
+5
V (4.95 ~ 5.05 V) — 10 A maximum
+24 V (24.4 ~ 24.7 V)
VH – thermal head voltage approximately 24 V
RF emissions
Both 115 and 220 VAC-configured instruments pass these
standards: FCC Part 15 Class B
VDE 0871/6.78 Class B
EN55022 (CISPR 22) Class B
VCCI (CISPR 22) Class B
Table 1-7. Environmental specifications
Characteristic Specification
Temperature
Operating
Non-operating
(power off)
Storage
(without transfer roll)
15
to 30 C
°
(59
to 86
°
F)
0
to 35
°
C (32
°
to 95
°
F)
-20
to 55
°
C (-4 to 131
°
F)
Humidity
Operating
Non-operating
10 to 80% relative humidity, non-condensing
10 to 80% relative humidity, non-condensing
Altitude
Operating
Non-operating
0 to 3048 m (10,000 ft.) at 25
°
C
0 to 9144 m (30,000 ft.)
Vibration/shock
Non-Operating
(vibration)
Non-operating (shock)
Operating (shock)
0.5 g, 25 minutes in three mutually perpendicular axes, no
resonant frequencies below 25 Hz.
30 g, half sine, 11 msec.
The printer may have any corner raised and dropped 2
inches, while no printing is in progress, without subsequent
impairment of operation.
Acoustic Noise
(operating)
Average sound level (LEQ) is less than 52 dbA. Peak noise is
57 dbA.
