Service Manual
8-13
FRU Disassembly/Assembly
8
Pick roller
1.
Turn off the printer. Remove the power cord.
2.
Push the top cover release to open the top cover.
3.
Remove the left-side, right-side and lower rear covers as explained in
the earlier topic “The printer covers” on page 8-2.
4.
Remove the feed roller as explained in the earlier topic “Feed roller”
on page 8-10.
5.
Remove the paper guide as explained in the earlier topic “Paper
guide” on page 8-12.
6.
Alter the pick roller’s ring stopper from its extended position to its
shortened position by separating the two halves and rotating one of
the halves until they fit together as shown.
Figure 8-10 Shortening the pick roller’s ring stopper
8850-56
Ring stopper
Spring
Nylon washer
Ring stopper
Pick roller
(flat key portion in
6 o'clock position)