![background image](http://html1.mh-extra.com/html/tektronix/gts1063/gts1063_instruction-manual_1079026021.webp)
Getting Started
4
GTS1063 and GTS1250 GBIC Test Systems Instruction Manual
Optional Accessories
Table 3 list optional accessories recommended for the GBIC Test System.
Table 3: Optional Accessories
Accessory
Part number
IBM 850 nm multimode 1.25 Gb/s GBIC
1
119-6112-00
IBM 1310 nm single-mode 1.25 Gb/s GBIC
1
119-6113-00
Side-By-Side Instrument Rack Adapter
TVGF13
1
GBIC functions as well at the lower 1.0625 GB/s rate.
For a list of part numbers, see page 77.
Installation
To learn how to install, access the front panel, power on, and power off the
GBIC Test System, do the following procedures:
To properly install and power on the GBIC Test System, do the following steps:
1. Be sure you have the appropriate operating environment. Specifications for
temperature, relative humidity, altitude, vibrations, and emissions are
included in the Table 14 starting on page 37.
CAUTION.
To prevent damage to your GBIC, provide proper ventilation. Do not
block the cabinet ventilation holes, or disable the fan. Do not remove the cabinet
feet, they provide proper clearance for ventilation.
2. Leave space for cooling. Do this by verifying that the ventilation holes on
the sides, top, and bottom of the cabinet are free of any airflow obstructions.
Leave at least 5.1 cm (2 inches) free on each side.
WARNING.
To avoid electrical shock, be sure that the power cord is disconnected
before checking or replacing the fuse.
3. The internal AC input to the power supply is protected with a 250V,
3.15 A(Fast) fuse. This fuse is only accessible by service personnel (see Fuse
Removal and Replacement on page 73).
4. Check that you have the proper electrical connections. The GBIC Test
System requires 100 to 240 VAC
RMS
"
10% 47 Hz to 63 Hz, and 60 W.
Preparation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com