Tektronix ATEC TekRanger 2 Скачать руководство пользователя

Страница: 128 / 174

Recharging the NiCad Battery

3–4

TFS3031 TekRanger/TekRanger 2 User Manual

CAUTION.

Do not connect the power/charger adapter to the TFS3031

when the ambient temperature exceeds 40

C (104

F).

To prevent overheating, remove the TFS3031 from its carrying case
during recharging.

A warning message on the screen indicates that about 30 minutes
of normal operating time remain.

A flashing red

BATTERY

LED on the front panel indicates that

about 10 minutes of normal operating time remain. (If the

BATTERY

LED is flashing red at power-on and the LCD screen

remains blank, there is not enough battery power to run the
instrument.)

The

BATTERY

LED flashes green when the power/charger adapter

is connected and the battery is recharging.

The

BATTERY

LED glows a steady green when the power/charger

adapter is connected and the battery has reached full charge.

The

BATTERY

LED is off when the power/charger adapter is

disconnected.

In the upper right corner of the screen, the ‘‘battery’’ indicator
always shows charge level of the battery. A ‘‘power plug’’
indicator is displayed when the power/charger adapter is plugged
in and charging the battery.

Recharging time for a completely discharged NiCad battery at
room temperature is about four hours if the TFS30301 is not
turned on.

Operating time for a fully recharged Nicad battery is about five
hours.

The TFS3031 may be powered on and operated during recharg-
ing. Recharging time will take longer if the TFS3031 is being
operated.

Recharging the NiCad Battery

3–4

TFS3031 TekRanger/TekRanger 2 User Manual

CAUTION.

Do not connect the power/charger adapter to the TFS3031

when the ambient temperature exceeds 40

C (104

F).

To prevent overheating, remove the TFS3031 from its carrying case
during recharging.

A warning message on the screen indicates that about 30 minutes
of normal operating time remain.

A flashing red

BATTERY

LED on the front panel indicates that

about 10 minutes of normal operating time remain. (If the

BATTERY

LED is flashing red at power-on and the LCD screen

remains blank, there is not enough battery power to run the
instrument.)

The

BATTERY

LED flashes green when the power/charger adapter

is connected and the battery is recharging.

The

BATTERY

LED glows a steady green when the power/charger

adapter is connected and the battery has reached full charge.

The

BATTERY

LED is off when the power/charger adapter is

disconnected.

Recharging time for a completely discharged NiCad battery at
room temperature is about four hours if the TFS30301 is not
turned on.

Operating time for a fully recharged Nicad battery is about five
hours.

The TFS3031 may be powered on and operated during recharg-
ing. Recharging time will take longer if the TFS3031 is being
operated.

Содержание ATEC TekRanger 2















































































































































































Результаты поиска

Содержание ATEC TekRanger 2

Отзывы:

Похожие инструкции для ATEC TekRanger 2

Бренды по названию

Популярные бренды

Tektronix ATEC TekRanger 2, Руководство пользователя

Результаты поиска

Содержание ATEC TekRanger 2

Отзывы:

Похожие инструкции для ATEC TekRanger 2

Бренды по названию

Популярные бренды