manualshive.com logo in svg

Tektronix ATEC TekRanger 2, Руководство пользователя

Поделиться
Скачать
Tektronix ATEC TekRanger 2 Скачать руководство пользователя страница 46

Setups

1–26

TFS3031 TekRanger/TekRanger 2 User Manual

Scan For

Scan For specifies whether to display all events or only events equal
to or greater than the user-set splice and reflectance threshold levels.

Only those events that are scanned for are displayed on the screen.
An asterisk (*) marks the splice loss or reflectance measurements
that are equal to or greater than the threshold.

Selections are All Events or Events Above Threshold. Factory
default is Events Above Threshold.

Scan For is user settable in IntelliTrace mode, and is disabled in
Manual and End of Fiber modes.

End of Fiber Threshold

End of Fiber Threshold specifies the threshold level (in dB) for
detecting the end of the fiber. The first event that has a loss equal to
or greater than the threshold level is marked as the end of the fiber,
then the test stops.

Selections are 3 dB to 10 dB in 1 dB steps. Factory default is 5 dB.

End of Fiber Threshold is user settable in IntelliTrace and End of
Fiber modes, and is disabled in Manual mode.

Setups

1–26

TFS3031 TekRanger/TekRanger 2 User Manual

Scan For

Scan For specifies whether to display all events or only events equal
to or greater than the user-set splice and reflectance threshold levels.

Only those events that are scanned for are displayed on the screen.
An asterisk (*) marks the splice loss or reflectance measurements
that are equal to or greater than the threshold.

Selections are All Events or Events Above Threshold. Factory
default is Events Above Threshold.

Scan For is user settable in IntelliTrace mode, and is disabled in
Manual and End of Fiber modes.

End of Fiber Threshold

End of Fiber Threshold specifies the threshold level (in dB) for
detecting the end of the fiber. The first event that has a loss equal to
or greater than the threshold level is marked as the end of the fiber,
then the test stops.

Selections are 3 dB to 10 dB in 1 dB steps. Factory default is 5 dB.

End of Fiber Threshold is user settable in IntelliTrace and End of
Fiber modes, and is disabled in Manual mode.

Содержание ATEC TekRanger 2















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды