manualshive.com logo in svg

Tektronix ATEC TekRanger 2, Руководство пользователя

Поделиться
Скачать
Tektronix ATEC TekRanger 2 Скачать руководство пользователя страница 123

Section 3.

Battery Recharging and Replacement

Section 3 includes information about the power/charger adapter, and
describes how to recharge and replace the NiCad battery.

CAUTION.

 To prevent overheating, remove the TFS3031 from its

carrying case during battery recharging.

Refer all battery and power/charger adapter problems to qualified
service personnel. If the power/charger adapter or battery is faulty it
must be replaced. It cannot be repaired.

WARNING.

 Do not open or mutilate the battery, nor expose it to fire

or intense heat. It may explode. Avoid contact with electrolyte, which
may damage eyes, skin, and clothing.

Do not attempt to use or recharge a battery that is leaking electro-
lyte, or is otherwise obviously damaged.

Section 3.

Battery Recharging and Replacement

Section 3 includes information about the power/charger adapter, and
describes how to recharge and replace the NiCad battery.

CAUTION.

 To prevent overheating, remove the TFS3031 from its

carrying case during battery recharging.

Refer all battery and power/charger adapter problems to qualified
service personnel. If the power/charger adapter or battery is faulty it
must be replaced. It cannot be repaired.

WARNING.

 Do not open or mutilate the battery, nor expose it to fire

or intense heat. It may explode. Avoid contact with electrolyte, which
may damage eyes, skin, and clothing.

Do not attempt to use or recharge a battery that is leaking electro-
lyte, or is otherwise obviously damaged.

Содержание ATEC TekRanger 2















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды