Tektronix ATEC TekRanger 2, Руководство пользователя

Страница: 42 / 174

Setups
1–22 TFS3031 TekRanger/TekRanger 2 User Manual
Fiber Scan
The Fiber scan setup specifies the test mode of the instrument. Fiber
Scan selections are: IntelliTrace Manual, and End of Fiber.
H
IntelliTrace. IntelliTrace mode automatically locates and
measures all events on a fiber. It is the easiest and most
commonly used test mode, and is the factory default.
IntelliTrace is a single-button test that automatically adjusts the
test setups to provide the best possible resolution for measuring
close-in events, while maintaining the necessary dynamic range
for measuring distant events. The result is a more accurate
waveform, and an event table that contains more accurate
measurements.
IntelliTrace mode automatically adjusts the Test Range,
Pulsewidth, and Averages parameters during the test. All other
parameters are user settable.
H
Manual. Use Manual mode when testing with specific Test
Range, Pulsewidth, and Averages parameters, and when doing
real-time and high-density testing.
The Splice Threshold, Reflectance Threshold, Scan For, and End
of Fiber Threshold setups are disabled. All other parameters are
user settable.
H
End of Fiber. End of Fiber mode quickly locates the end of the
fiber, and measures total length, slope, and loss. It does not locate
or measure other events.
The Test Range, Pulsewidth, and Averages parameters are
adjusted automatically. The Splice Threshold, Reflectance
Threshold, and Scan For setups are disabled. All other parameters
are user settable.
Setups
1–22 TFS3031 TekRanger/TekRanger 2 User Manual
Fiber Scan
The Fiber scan setup specifies the test mode of the instrument. Fiber
Scan selections are: IntelliTrace Manual, and End of Fiber.
H
IntelliTrace. IntelliTrace mode automatically locates and
measures all events on a fiber. It is the easiest and most
commonly used test mode, and is the factory default.
IntelliTrace is a single-button test that automatically adjusts the
test setups to provide the best possible resolution for measuring
close-in events, while maintaining the necessary dynamic range
for measuring distant events. The result is a more accurate
waveform, and an event table that contains more accurate
measurements.
IntelliTrace mode automatically adjusts the Test Range,
Pulsewidth, and Averages parameters during the test. All other
parameters are user settable.
H
Manual. Use Manual mode when testing with specific Test
Range, Pulsewidth, and Averages parameters, and when doing
real-time and high-density testing.
The Splice Threshold, Reflectance Threshold, Scan For, and End
of Fiber Threshold setups are disabled. All other parameters are
user settable.
H
End of Fiber. End of Fiber mode quickly locates the end of the
fiber, and measures total length, slope, and loss. It does not locate
or measure other events.
The Test Range, Pulsewidth, and Averages parameters are
adjusted automatically. The Splice Threshold, Reflectance
Threshold, and Scan For setups are disabled. All other parameters
are user settable.