Tektronix ATEC TekRanger 2, Руководство пользователя

Страница: 97 / 174

TFS3031 TekRanger/TekRanger 2 User Manual 2–29
File Storage
NOTE . This section describes how to save, load, copy, and delete files
to and from internal memory and floppy disk (the Save, Load, Copy,
and Delete options).
For information about printing files (the Print option) see ‘‘Printing
Files’’ on page 2–43.
For information about copying files to a personal computer (also a
part of the Copy option) see ‘‘Copying Files to a Personal Comput-
er’’ on page 2–49.
Introduction
Before test results can be stored in memory, they must be displayed
on the screen as either a waveform or event table. Both the
waveform and event table can be stored together.
Push the
Store or Print
softkey to access the options for storing,
printing, copying, and deleting files. Store/print options are displayed
in the lower right corner of the screen (see Figure 2–10 on page
2–30).
Store/print options are:
H
Save. Saves files in storage. Storage consists of 1.44 Mbyte
internal memory or optional 1.44 Mbyte, 3.5 inch floppy disk.
H
Load. Loads files from storage onto the screen for viewing.
H
Copy. Transfers files between internal memory and floppy disk.
The Copy option also copies files to a personal computer (see
page 2–49).
H
Delete. Deletes files from storage.
H
Print. Prints files on an external printer (see page 2–43).
TFS3031 TekRanger/TekRanger 2 User Manual 2–29
File Storage
NOTE . This section describes how to save, load, copy, and delete files
to and from internal memory and floppy disk (the Save, Load, Copy,
and Delete options).
For information about printing files (the Print option) see ‘‘Printing
Files’’ on page 2–43.
For information about copying files to a personal computer (also a
part of the Copy option) see ‘‘Copying Files to a Personal Comput-
er’’ on page 2–49.
Introduction
Before test results can be stored in memory, they must be displayed
on the screen as either a waveform or event table. Both the
waveform and event table can be stored together.
Push the
Store or Print
softkey to access the options for storing,
printing, copying, and deleting files. Store/print options are displayed
in the lower right corner of the screen (see Figure 2–10 on page
2–30).
Store/print options are:
H
Save. Saves files in storage. Storage consists of 1.44 Mbyte
internal memory or optional 1.44 Mbyte, 3.5 inch floppy disk.
H
Load. Loads files from storage onto the screen for viewing.
H
Copy. Transfers files between internal memory and floppy disk.
The Copy option also copies files to a personal computer (see
page 2–49).
H
Delete. Deletes files from storage.
H
Print. Prints files on an external printer (see page 2–43).