Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 197 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 9.43
9.5.1.4. Table of configuration parameters
To correctly display the parameter values, you need to load them from the low kit, using
the “Read from low kit” function.
To change the setting, press the
CHANGE
key and insert the value using the numeric keyboard.
Press
ENTER
key to confirm or
BACK
key to back forward.
After any changes to the parameter values, you need to load them in the low kit using
the “Write to low kit” function.
Parameter Description Range Default values
Par 01 Default speed for Quick Start workout. [Km/h*10] n.m. 8
Par 02
Default acceleration and deceleration for tread
belt motor. [Km/h*100/sec]
n.m. 100
Par 03
Default zero reference position for tread-belt
incline. [*2]
n.m. 0
Par 04 PID proportional gain. [*100] n.m. 7
Par 05 PID Integral gain. [*100] n.m. 150
Par 06 Ramp Type n.m. 0
Par 07 Error status on DC motor encoder 0 - 1 0
Par 08 Serial communication timeout [10*msec] n.m. 0
Par 09 DC motor encoder error timeout. [msec] 0 - 255 15
Par 10 - 0
Par 11 FREE n.m. 91
Par 12 Driving roller diameter. [mm] n.m. 200
Par 13 Pulley ratio 0 - 1 0
n.m = Value not modifiable.
Press
HOME
to confirm and save,
FORWARD
or
BACK
to scroll the pages.