Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 175 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 9.21
9.3.14. R
EADY TO
R
UN
Feature not available on this product.
9.3.15. U
SER DETECT
This function is able to detect the presence of a user running on the tread belt during an exercise
session. It is possible to configure a minimum speed at which the machine will determine that the
user has stopped running on the treadmill, and interrupt the exercise session if the condition persists
for one minute. To change the setting, when the LED matrix shows the current duration:
USER DETECT: xxx
It is possible to set this parameter, ranging from 0 to 25 Km/h.
The default value of this parameter is 5.0 km/h
The minimum threshold speed for the user detect function is 3.0 km/h. Entering any
value lower than this will have the effect of disabling the user-detect function.
If the unit of measurement is setted to IMPERIAL units (miles / pound), the default
value for this parameter is 3 mph while the minimum speed is 2 mph.
9.3.16. R
ESETTING PARAMETERS TO DEFAULT VALUES
It is possible to reset the user menu parameters to their default values.
To select the function, press
DEFAULT CONFIG
.
Press
HOME
to confirm and save,
FORWARD
or
BACK
to scroll the pages.
9.3.17. F
ORMATTA CHIAVE
P&P
This function formats a TGS key for Plug&Play mode operation. To select the function, press
“
FORMAT P&P
” key.
Press
HOME
to confirm and save,
FORWARD
or
BACK
to scroll the pages.