Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 107 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 6.43
Is the transmitter alway s within
the 90 cm range f rom the receiv er
NO
Reposition the transmitter
within range
YES
Replace the receiv er
A
Is the transmitter in good
working order?
Use a correctly
f unctioning transmitter
YES
NO
5
Follow the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below:
(1) Check the earthing of the machine using a tester to measure the resistance between the
ground pin on the power supply cable and the ground node to which the receiver is connected
inside the display. The value must be less than 1 Ohm.
(2) For machine positioning layouts, use the following diagram as a reference, where the value
in the diagram indicates the medium distance for signal reception during the exercise (± 4”
inches or 10 cm).