Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 72 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 6.8
6.2.1.3. Inverter Test
The inverter test checks the condition of theAT UL driver. The test can have two outcomes:
•
“Test Successful, press Enter to continue”:
This means that the test was completed
successfully and the inverter is not in an error condition.
•
“Inverter Error, press Enter to continue”:
This means that the test was not completed
successfully, i.e. that the serial link is inactive and/or the inverter is in an error condition.
6.2.1.4. LED Test
The LED test checks the functioning of the display by lighting all the LEDs in the matrix. It also
tests the buzzer, varying the frequency to produce different tones of sound.
The test does not produce a result message, so the user must visually check the outcome.
6.2.1.5. Serial Ports Test
The serial ports test checks the following communication ports:
•
CSafe COM test;
•
Low Kit COM test;
•
TGS COM test.
Using the + and – speed keys, select the desired test item and confirm by pressing
ENTER
. The test
can have two outcomes:
•
“Test Successful, press Enter to continue”:
This means that the test was completed
successfully, i.e. that serial communications on the selected port are correct.
•
“COMx Error, press Enter to continue”:
This means that the outcome of the test was
negative: the message will specify COM1 in the case of the CSafe COM test, COM2 in the case
of communications with the low kit, or COM3 in the case of the TGS COM test.
The “TGS COM test” done on machine not provided with the key reader gives a fail
outcome. The same if the “CSafe COM test” is done on a machine which CSafe port is
not plugged with the monitor plug described at paragraph: 4.4. “Monitor plug for CSafe
port”.