Tatoma MT-7, Руководство пользователя

Страница: 37 / 90

MT HORIZONTAL MIXER WAGON.
USER’S MANUAL
8
Keep the steps clean and never jump from the steps to the ground. There is a risk of
injury exists due to a possible slip or fall.
Do not add any element, mechanism or system that allows access to the tub above the
height of the last step on the ladder.
Under no circumstances should the inside of the tub be accessed while the machine is
running. During maintenance or repair work, the tub shall be accessed exclusively by
experienced personnel while the machine is completely shut down, and the person
entering the tub should have the tractor ignition key in his possession. The PTO shaft
should be disconnected from the tractor.
Front Jack (1): The front jack keeps the mixer in a proper position while parked. It can be manually
or hydraulically operated.
Hydraulic System and Components (12/14): All circuits on the mixer are independent from the
tractor, and have been built using high quality components. Pumps, valves, motors, cylinders and
fittings are all high quality. The hydraulic oil added depends on the model.
Controls system (2): The mixer has a remote-control system made up of levers and cables. There is
the option to install electronic controls and a remote control.
Accessories: The machines are equipped with the following components:
Chocks (21): Located at the rear part of the mixer (depending on the model), two chocks are
provided in a support attached to the mixer.
Weighing scale (13): Consists of weighing cells installed between the tub and chassis that
transmit a signal to a screen that indicates the weight of the object being loaded or the quantity
mix that has been unloaded. Standard scales are programmable, and can be accompanied
with a printer or remote display.
Battery (11): Optionally, the mixer can be provided with a battery installed in the interior of the
support.