MT HORIZONTAL MIXER WAGONS
USER’S MANUAL
Page
29
1.
Are not an obstacle for accessing or abandoning the driver's seat.
2.
do not reduce visibility or inhibit the drivers movement while driving the tractor.
3.
can be comfortably activated from the driver’s seat without having to hold tense positions.
4.
cannot be activated involuntarily or accidentally.
TATOMA declines all responsibility for accidents occurring as a result of non-compliance
with the previous recommendations provided for mounting the control levers on the inside
of the tractor cab.
While controlling the mixer from the tractor cab, the control levers should always stay
mounted on the support plate.
Solenoid Valve Block
Optionally, a solenoid valve block (M) can be provided to control the different services. In this case one
solenoid valve is provided for each service. This block is located at the front of the mixer, and it is covered
by a removable guard.
Figure 2.8 Block
Each solenoid valve on the block can be controlled according to the following options (See Figure 2.9):
•
Electric control - Button control panel with a number of pushbuttons, depending to the number of
services.
•
Radio remote control - Made up of a receiver, situated on the mixer and a small portable emitter
with a number of buttons that corresponds to the number of services.
CAMBIAR FOTO DE LA BOTONERA
M
M
Содержание MT-7
Страница 2: ...ATTENTION READ CAREFULLY THIS MANUAL BEFORE YOU START USING YOUR MIXER...
Страница 3: ......
Страница 29: ...MT HORIZONTAL MIXERS USER S MANUAL 26 INSTRUCTIONS MANUAL...