Tatoma MT-7, Руководство пользователя

Страница: 20 / 90

MT-HORIZONTAL MIXERS
USER’S MANUAL
17
•
Before accessing the inside of the tub, as an additional security measure,
disconnect the PTO shaft from the tractor.
•
It is strictly prohibited to incorporate devices into the mixer, which provide
access to the tub with a height above the last step of the mixer ladder.
•
Operate with extreme caution when handling the moving parts of the mixer,
and make sure there are no people near these items before their operation,
on the contrary, the
mixer’s driver should proceed to warn and evacuate the
working area.
•
Do no open the mixer protections when they are running or handle elements
in movement such as the unloading conveyor, etc.
•
Do not clean, lubricate or adjust the mixer while is moving;
•
Caution, do not wear loose clothing when approaching the moving parts of
the mixer, the PTO
’s or the shaft. Always check that all safety protections are
in their correct position and in good condition.
•
As a precaution, re-check the mixer every 100 hours of operation. Correct
any problems and follow the maintenance safety procedures.
•
Never leave the mixer unattended .
Maintenance work. High pressure fluids, Welding ...:
It is the responsibility of the owner and / or operator of
the mixer to ensure it
’s correct maintenance. Poor
maintenance is an invitation to future problems and
failures.
•
The area where the mixer maintenance work has to be
carried out, should have sufficient ventilation. Never do
this work with the tractor engine running in an enclosed
building. Exhaust gases can cause asphyxiation.
•
Before working inside the mixer, stop the vehicle
completely, apply the parking brake, disengage the
PTO and power cables, turn off the engine and remove
the ignition key.