MT HORIZONTAL MIXER WAGON
USER’S MANUAL
Page 51
4.3. LEVEL CHECK
Weekly check the oil levels of the multiplicator, auger reductor, and beater reductors through the level
indicators. In general, if oil levels are low they should be refilled. The following should be taken into account:
1. Be sure the appropriate oil is used, according to the indications in Table 4.3. (See Section 4.2.)
2. Oil levels have to be checked when the mixer is stopped in a levelled ground, and temperature must
be in cold, before starting using the mixer.
3. Open the filler cap and check the level in the corresponding indicator.
4. Fill the oil to correct level, and close the cap.
Hydraulic System
Figure 4.1. Hydraulic Oil Reservoir
In order to check the hydraulic oil level, the tank has an indicator level (V), at the top righ side f the tank. The
refill is done through the cap (L), located at the top of the tank.
If the hydraulic oil level is low, fill it immediately. Running the machine with a low hydraulic oil level can
provoke the overheating of the oil, and the irreversible deterioration of the hydraulic installation.
Auger reductor
Figure4.2. Auger Reductor
V
L
V
L
Содержание MT-7
Страница 2: ...ATTENTION READ CAREFULLY THIS MANUAL BEFORE YOU START USING YOUR MIXER...
Страница 3: ......
Страница 29: ...MT HORIZONTAL MIXERS USER S MANUAL 26 INSTRUCTIONS MANUAL...