Tatoma EMV-8, Инструкция по эксплуатации

Страница: 17 / 68

TOWED VERTICAL MIXER
1. MIXER DESCRIPTION
1.1. INTRODUCTION
TATOMA designs its mixers thinking of how to facilitate your daily work,
save you time and, accordingly, improve performance and the benefits of
use.
With our mixers, you can ration the way you feed your herd improving
the efficiency of your work.
The breadth of our range of products allows us to solve any query.
To assure that the mixer is operated correctly, it is recommended to
designate a person in charge, who has previous experience driving tractors
or other farm machinery. This will also facilitate the instruction period.
Attention! Technical data and characteristics of the trademark or model, of
the different marketing materials or other components of the mixers cited in
this manual are indicative. TATOMA reserves the right to modify the design
or specifications without prior notice.
1.2. USING THE MIXER
The towed mixer has been designed specifically to perform the following
operations only:
-
Chop silage (depending on the model)
- Load loose silage:
ƒ
By hand (depending on the model)
ƒ
Using the appropriate machine
ƒ
From an automatic silo
- Mix silage with other feeds or compliments
- Dose the mix previously cited
It is strictly prohibited to carry out operations other than those
specified here. Doing so could run the risk of physically putting
the driver and people near the mixer in danger, and it could
cause major breakdowns to the mixer.
Carrying out operations different from those specified will
result in the immediate loss of the warranty.
The previous operations should be carried out by one single
person. When other machines are used with the mixer (loading
the mixer), the operation of these shall be coordinated by one
single person.
While performing the previous operations, the presence of
unauthorised persons in the mixer working area shall be
avoided at all times.
1.3. MAIN PARTS OF THE MIXER
The mixer system, incorporated in the machinery described in this
manual, is a vertical type, with one or two conical augers incorporated in the
inside of the cone shaped tub, with an open ended opening at the top.
The tub has several circular metal sections (operated manually or
hydraulically, hydraulic shredder option), which allow the degree of
shredding of the products that form the mix to be controlled.
The mixing principle is based on the movement of the product by the
auger, which turns and lifts the components of the mix upward. Then, these
fall by gravity around the edges of the tub and down to the bottom of the
auger. Accordingly, the components and the mix are in continual motion.
Page 12