Tatoma EMV-8, Инструкция по эксплуатации

Страница: 49 / 68

TOWED VERTICAL MIXER
The locations of the grease fittings previously cited are shown in the
following figures.
4.4. GREASE
All the machine’s moving joints and drives should be cleaned and greased
weekly using the fittings provided for said purpose (See Fig. 4.11 and 4.12.).
It is good for this to be done by a person with experience in order to observe
the behaviour of the different mechanisms
Figure 4.7: Grease Fitting
The grease fittings are identified using the label
described at the beginning of this manual and shown
again here.
To avoid damaging the bearing retainers, do not
apply excess grease, especially if using an air
compressor pump.
High quality lithium grease should be used for
greasing.
E
Page 44