Tatoma EMV-8, Инструкция по эксплуатации

Страница: 37 / 68

TOWED VERTICAL MIXER
Page 32
6. Carry out the electrical and the hydraulic connections between the
mixer and the tractor (see section number 2.9).
7. Remove the chocks and place them in their holder or, let off the
parking brake fully.
Driving with the parking brake on may produce
breakdowns and tyre blow-out on the mixer due to
overheating, which may in turn cause accidents.
8. Remove the control levers from their holder and place them inside the
tractor cab.
9. Before starting to work with the mixer the operator should:
ƒ
Correctly adjust the position of the mixer control levers and the
driver’s seat, so that the driving position as well as the access
to the mixer controls is comfortable and not is a forced position.
Adjust the driver’s seat to the most ergonomic
position for handling the tractor and the mixer, by
doing so possible back injury and pain can be
avoided.
ƒ
Adjust the tractor back-view mirrors so that driving visibility as
well as direct visibility of the various mixer mechanisms mixer is
optimal.
Correct adjustment of the back-mirrors will enable the
mixer driver to reduce the possibility of accidents.
For back mirror adjustment the help of another person is
recommended while the driver remains in the position to drive the tractor.
For safety reasons all the aforementioned operations
should be carried out with both the tractor and the mixer
stopped.
Warning! If the tractor is not fitted with back view mirrors, they will need to be
installed. If the tractor has view back mirrors which do not guarantee the
correct visibility for driving and the control over the different mechanisms of
the mixer, it will be necessary to install another set of back view mirrors or
modify the existing one. TATOMA declines all liability for possible damages
caused to persons or property arising from inadequate or non existent back
view mirrors.
10. Once the previously mentioned adjustments have been carried out the
driver should carry out the following checks:
ƒ
Check, while standing up, that the visibility from the inside of
the tractor to the back part of the mixer is good, especially if the
mixer is equipped with a back loading system.
ƒ
Check, while standing up, the visibility of the mixing from the
inside of the cab.
ƒ
Check, from the driver’s position through the rear view mirrors,
that visibility is good on the unloading system.
For safety reasons all the aforementioned operations
should be carried out with both the tractor and the mixer
stopped.
11. Get familiar with the controls already described in Section 2 from the
driver’s seat
12. The mixer operator should keep in mind at all times the following
safety recommendations:
The mixer should be controlled by only one person, the
tractor driver, who shall coordinate the actions of other
people or machines should their intervention be necessary
The tractor driver should avoid at all times the presence of
non authorised personnel near the mixer working area.