Tatoma EMV-8, Инструкция по эксплуатации

Страница: 28 / 68

VERTICAL TOWED MIXER
3. If the mixer is equipped with a hydraulic support foot, return the
level to its holder.
2.4 MIXER CONTROLS
Single block distributor
To work the different services of the machine, it is fitted with a single block
hydraulic distributor (D), situated in the inside of the control holder column(C)
that protects it from damage. Working the distributor is carried out from a
distance using a cable control worked by a lever for each one of the mixer
services.
Figure 2.7: Control holder columns and details of the single block distributor
The mixer is equipped with a plate (Ch), bolted onto the side of the control
holder column where the remaining controls can be left, when not in use or
when the mixer is parked (See figures 2.7 and 2.8).
Ch
C
Figure 2.8 control levers
A separate plate is also supplied with the mixer, similar to the previous one,
to be assembled in the tractor cabin, so that during the mixer handling the
control levers remain correctly placed and bolted down. The plate should be
placed in the inside of the tractor cabin where the control levers:
M 1. Do not represent an obstacle when entering or leaving the
driving position.
2. Do not reduce visibility or hinder the driver’s movements when
handling the tractor.
3. Can be worked, from the driver’s post, comfortably and without
maintaining forced positions.
4. They cannot be used involuntarily or accidentally.
TATOMA declines all responsibility for actions derived from non
compliance of the previous recommendations for the assembly
of the control levers in the inside of the tractor cabin.
During the handling of the mixer from the tractor cabin, the
control levers should always be mounted on the plate supplied
for the purpose.
Page 23