Tatoma EMV-8, Инструкция по эксплуатации

Страница: 45 / 68

TOWED VERTICAL MIXER
4. MIXER MAINTENANCE
4.1. GENERAL MAINTENANCE INSTRUCTIONS
All maintenance operations should be performed with the machine turned
off and with the tractor’s ignition key in the possession of the personnel that
are performing the maintenance.
Do not forget to replace all of the protective devices that have been
removed during the cleaning, upkeep, or repair.
If any type of vibration, resistance to movement, or noise is perceived
upon starting up the mixer; stop it and look for the cause that is impeding
correct operation. If the cause of the problem is not found, the mixer should
be inspected by a specialized technician
By performing the maintenance operations in the following tables at the
indicated times, the machine user will:
- Ensure that machine operates in perfect condition while working.
- Extend the machine’s useful life.
-
Avoid prolonged shutdowns and unnecessary repairs as well as the
resulting loss of time and money.
4.2. MAINTENANCE OPERATIONS
Maintenance operations to be performed by the machine user:
Here we include the basic maintenance operations that should be carried out
by the machine operator.
MAINTENANCE OPERATIONS
1º
Frequency
Check levels (See Section 4.2)
Check hydraulic oil level
Check auger gear reducer oil level
Check gearbox oil level
15
hours
Weekly
Grease (See Section 4.4)
Grease the points indicated See Figures 4.11 and
4.12.
Weekly
Filters (See Section 4.4)
Check build-up hydraulic circuit filter
Daily
Wheels and pneumatics (See Section 4.5)
Check pneumatic pressure
Weekly
Check that the lug nuts on the wheels and the
spring clamps are tight (according to model)
Start up Monthly
Check for the presence of objects embedded in the
in the pneumatic hose’s tread
Weekly
Check for the presence of cuts or cracks hoses
Weekly
Battery (See Section 4.6)
Check the condition of the terminals
Check the electrolyte level and charge the battery
Every 4 months
Tub and auger (See Section 4.7)
Check the wear on the auger blades
Check tightness of screws on auger blades
Monthly
Clean the inside of the tub
Unloading Belt (See Section 4.8)
Clean the unloading belt
Weekly
Check and adjust the tension of the unloading belt
chain
Monthly
Page 40