Tatoma EMV-8, Инструкция по эксплуатации

Страница: 29 / 68

HORIZONTAL TOWED MIXER
Electrovalve block
As an option to work the different services of the machine, an electrovalve
block can be supplied (M), comprising an electrovalve for each operation that
can be carried out by the mixer. The said block is situated in the inside of the
control column holder (C).
Figure 2.9: Control holder and electrovalve block
Each electrovalve from the block can be carried out depending on the
following options
•
Electric control: This comprises a button control panel, which is
equipped with as many buttons as there are operations on the
mixer (See figure 2.10).
•
Radio controlled control: Comprised by a receiver situated on the
mixer and a portable small sized emitter, with as many buttons as
the mixer has (See figure 2.10).
The function of each of the push
button on the control panel via radio is
shown on the adhesive labels.
C
M
Figure 2.10: Button panel and template from the control panel via radio.
The operator must be careful with mixer controls when the
mixer controls are out of the tractor cabin, especially in the
case of the radio controlled option and about the danger of the
inadvertent starting up of the mixer operations, which could
cause serious accidents.
Each element on the control block (depending on the option), is duly
marked with an adhesive label indicating the function of each one of the
elements. Should the labels deteriorate, the machine user may request new
ones from the official distributor or TATOMA.
The following drawing shows the different adhesive labels previously
mentioned.
Page 24