Tatoma EMV-8 Скачать руководство пользователя

Страница: 8 / 68

VERTICAL TOWED MIXER

3. RECEPTION OF THE MIXER

Upon reception of the mixer, the owner or the personnel in charge of it

should proceed in the following manner:

Check that the mixer is supplied with the corresponding instructions
manual.

Read the instruction manual carefully, paying careful attention to the
safety regulations.

Check that the mixer is not faulty and has no flaws.

Check that the mixer is delivered with all the accessories and
optional elements requested.

Once the mixer has been delivered and before being put into service

qualified personnel from TATOMA will instruct the owner or the personnel in
charge of the machine on its use, maintenance, and the safety regulations
to be taken into consideration for its correct use

Warning!

Should the owner, hire or sell the mixer to a third party, he

should also hand over the instructions manual dealing with the
aforementioned information to the new owner.

Page 3

Содержание EMV-8





































































Результаты поиска

Содержание EMV-8

Отзывы:

Похожие инструкции для EMV-8

Бренды по названию

Популярные бренды

Tatoma EMV-8, Инструкция по эксплуатации

Результаты поиска

Содержание EMV-8

Отзывы:

Похожие инструкции для EMV-8

Бренды по названию

Популярные бренды