Tatoma EMV-8, Инструкция по эксплуатации

Страница: 30 / 68

VERTICAL TOWED MIXER
Depending on the symbols shown on the previous drawing the function of
each of the following of each control block is the following:
1. - Working the unloading belt
2. - Working the unloading door
3. - Working the folding belt (Folding belt option)
4. - Working the hydraulic foot rest (depending on the model)
5/6. - Working the side unloading door (Depending on the model)
7. -
Hydraulic shredders (Depending on the model)
Adhesive labels that indicate the function of each hydraulic
distributor and each control of the mixer should be kept in a
good state and should be substituted in the case of wear.
Accidents can be caused by unexpected movements of the
mixer functions on handling the wrong control or because of
incorrect or non existent identification.
The single block distributor or the electrovalve block, depends, as has
been previously mentioned on the functions available (See the following
figure).
Figure 2.12: Hydraulic block detail
2.5 LIGHTS AND SIGNALS
All towed mixers manufactured by TATOMA are fitted on the back with
triangular shaped lights
Note: The numbers on the top left corner of
each adhesive label is only for the purposes of
this manual and do not appear on the real
adhesive label situated on the control items.
1
2
3
4
5
6
7
Working pressure regulator
Hydraulic shredders
Rest of functions
Figure 2.11: Control symbols
Page 25