Tascam DM-3200 Скачать руководство пользователя

Страница: 106 / 120

9 – Specifications : Messages and troubleshooting

106

TASCAM DM-3200 Owner’s Manual

✔

AUX1 Pan/Bal
Copy Aux1-2Level -> Ch Fader Level?
Press ENTER to confirm,
or a cursor key to cancel.

Copying the AUX 1-2 pan and balance settings to the channels.

✔

AUX1-2 Level
Copy Aux 1-2Pan/Bal -> Ch Pan/Bal?
Press ENTER to confirm,
or a cursor key to cancel

Copying the AUX 1-2 pan and balance settings to the channels.

✔

AUX1-2 to STEREO is assigned
Press ENTER to continue.

In the master buss assignment, this message appears if an attempt is made to
override an existing assignment (“Routing & assignment” on page 46).

✔

AUX1-2Level
Setup Ch parameters?
Press ENTER to confirm,
or a cursor key to cancel

Copying the Aux 1-2 parameter settings to the channels.

✔

AUX1 Pan/Bal
Copy Ch Pan/Bal -> Aux1-2 Pan/Bal?
Press ENTER to confirm,
or a cursor key to cancel

Copying the channel pan and balance levels to the Aux 1-2 pan and balance.

✔

AUX1-2 Level
Copy Ch Fader Levels -> Aux1-2 Level?
Press ENTER to confirm,
or a cursor key to cancel.

Copying the channel fader levels to the Aux 1-2 levels.

✖

Battery is defective
Can’t save system data.
Please contact TASCAM service.
Press ENTER to continue

The internal battery is defective, or has lost charge, so data can’t be stored.
Contact TASCAM service or your distributor for a replacement battery.

●

Cannot assign fader grouping layer.

An attempt has been made to make an invalid fader group (“Fader groups” on
page 74)

✖

Cannot create more
than 128 projects.

There is a limit of 128 projects that can be created on one CF card. Delete an
unwanted project and try again.

✖

Can’t Copy.
Please check CF status.
Press ENTER to continue.

An attempt to copy bank data on a CF card has failed. The card may be full.

✖

Can’t recall COMP/EXP Library
Bank a-bbb

The named compressor/expander library item cannot be recalled. The data may
be missing or corrupt.

✖

Can’t recall Effect
Bank a-bbb

The named effect library item cannot be recalled. The data may be missing or
corrupt.

✖

Can’t recall Effect
Preset 1-bbb

The named effect library preset cannot be recalled. The data may not exist or
may be corrupt.

✖

Can’t recall EQ Library
Bank a-bbb

The named EQ library item cannot be recalled. The data may be missing or
corrupt.

✖

Can’t recall EQ Library
Preset 1-bbb

The named EQ library preset cannot be recalled. The data may not exist or may
be corrupt.

✖

Can’t recall GATE Library
Bank a-bbb

The named gate library item cannot be recalled. The data may be missing or
corrupt.

✖

Can’t recall GATE Library
Preset a-bbb

The named gate library preset cannot be recalled. The data may not exist or may
be corrupt.

✖

Can’t recall COMP/EXP Library
Preset 1-bbb

The named compressor/expander library preset cannot be recalled. The data
may not exist or may be corrupt.

✖

Can’t recall snapshot
Bank a-bbb

The named snaphot cannot be recalled. The data may be missing or corrupt.

Action

Message

Meaning

Table 9.2: Popup messages

Содержание DM-3200

























































































































Результаты поиска

Содержание DM-3200

Отзывы:

Похожие инструкции для DM-3200

Бренды по названию

Популярные бренды

Tascam DM-3200, Руководство пользователя

Результаты поиска

Содержание DM-3200

Отзывы:

Похожие инструкции для DM-3200

Бренды по названию

Популярные бренды