Tascam DM-3200, Руководство пользователя

Страница: 83 / 120

6 – Effects : Setting up the effects
TASCAM DM-3200 User’s Manual
83
All effects are stereo in, stereo out, except for the
Distortion and Guitar Compressor TASCAM effects.
TC Works effect parameters
The TC Reverb effect is a complex reverb effect with
many settings. The top row is the same as for the TASCAM effect
settings, and the other PODs are used as follows:
Exciter ( EXCITER )
— — Sense (SENSE)
0 – 42 Frequency (FREQUENCY)
1.0 kHz – 10.0 kHz
Flanger ( FLANGER )
Rate (RATE)
0.0 Hz – 10 Hz Depth (DEPTH)
0% – 100% Resonance (RESONANCE)
0.00 – 1.00 Delay (DELAY)
0 ms – 500 ms
Guitar compressor ( GUITAR COMPRESSOR ) a
— — Ratio (RATIO)
0 – 42 Attack (ATTACK)
0.1 ms – 5.0 ms
Phaser ( PHASER )
Steps (STEPS)
1–16 LFO rate (LFO RATE)
0.0 Hz – 10 Hz LFO depth (LFO DEPTH)
0% – 100% Resonance (RESONANCE)
0% – 100%
Pitch shifter ( PITCH SHIFTER )
Semitone shift (SEMITONE)
–12 – +12 Fine pitch (FINE)
–50 cents – +50 cents Pre-delay (PRE DELAY)
50 ms – 500 ms Feedback (FEEDBACK)
0% – 90%
Soft compressor ( COMPRESSOR ) - uses 2 rows of PODs
Threshold level (THRESHOLD)
–40 dB – –1 dB Ratio (RATIO)
1:1.00 – 1:inf Attack time (ATTACK)
0.05 s – 5.00 s Release time (RELEASE)
50 ms – 500 ms
— — — Knee shape (KNEE)
1.0 – 0.5
a. Mono in, mono out
POD 1 POD 2 POD3 POD 4
Table 6.5: TASCAM effect parameters
POD 1 POD 2 POD 3 POD 4
Row 2
BALANCE HIGH CUT FILTER
Initial reflections balance
(I/R) <50 – >0< – 50>
Tail balance (TAIL)
<50 – >0< – 50> High cut filter frequency
(HICUT) 20 Hz – 16 kHz High cut filter attenuation
(ATT) –40.0 dB – 0 dB
Row 3
SPACE EDITOR
Space editor shape (SHAPE)
HALL, H.SHOE (horseshoe),
PRISM, FAN, CLUB, SMALL Space editor size (SIZE)
4% – 400% Space editor wall diffusion
(W-DIFF) –50% – 0% –
+50% Space editor stereo width
(WIDTH) 0% – 100%
Row 4
DECAY
Low time (LOW)
0.25 s – 64.00 s Mid time (MID)
0.25 s – 64.00 s High time (HIGH)
0.25 s – 64.00 s Scaling range (RANGE)
1s/4 s/16 s/64 s
Row 5
Decay crossover frequencies ( X-over )
Low crossover point
(X-LOW)
20 Hz – 16 kHz
— High crossover point
(X-HIGH)
20 Hz – 16 kHz
—
Table 6.6: TC Reverb effect parameters