Tascam DM-3200, Руководство пользователя

Страница: 19 / 120

2 – Basic operational concepts : Special controls
TASCAM DM-3200 Owner’s Manual
19
TIP
You can change between a white on black display
and a black on white display by using the
ALT
+
FLIP
key combination.
POD knobs are also used on some screens to make a
selection from a list. In these cases, the screen shows
what POD knob should be used to change the selec-
tion:
The POD keys are often used as soft keys to perform
an action, as shown on the bottom of the screen (on-
screen buttons).
Other screens may use them as buttons which display
a pull-up list of options. When the list is shown, the
appropriate POD encoder, or the main dial, is used to
navigate through the list, and the POD key or
ENTER
key is used to confirm the entry.
The POD keys may also be used to select “sub-
screens” from within a major heading. In this case,
simply pressing the appropriate POD key jumps to
the next screen: as shown on the “tag”:
TIP
As well as using the POD keys to switch between tabbed
pages, you can also make repeated presses of the key
that was used to bring up the screen (with the
ALT
indicator lit if necessary) to change between these
pages.
The POD keys may also be used to jump to another
screen with a different function.
TIP
The POD knobs change values fairly coarsely, but be
pressing and holding the
SHIFT
key (to the left of the
unit), the POD knobs can be used for fine adjustment.
This behavior can be changed (see “Encoder behavior”
on page 23 below).
Figure 2.4: POD knobs used in a multi-control
screen
Figure 2.5: POD knob 4 used as list selector
Figure 2.6: POD keys 2 through 4 used as soft keys
Figure 2.7: POD 1 used with a pull-up menu list
Figure 2.8: POD keys used to select sub-screens
Figure 2.9: POD keys 2 and 4 used to jump to
other screens (library screens)