Tascam DM-3200 Скачать руководство пользователя | Manualshive

Страница: 49 / 120

background image

4 – Routing & assignment : Routing

TASCAM DM-3200

User’s Manual

49

Output routing

The output routing screen allows you to tie the logi-
cal outputs from the different parts of the DM-3200
to the physical output ports.

There are two such screens, one dedicated to the
built-in outputs of the DM-3200, and the other dedi-
cated to the outputs provided by any optional cards
fitted in the slots.

Use POD 3 to select the physical terminals to which
the output sources will be routed.

Select from:

•

TDIF1

,

TDIF2

,

TDIF3

The three TDIF format

connectors

•

ADAT

The optical ADAT output

•

DIGITAL OUT

The stereo digital outputs

•

ASN SEND

The four analog assignable sends

•

EFF SEND1

,

EFF SEND2

These are not physical outputs,

but virtual patches to the inputs of the internal
effects.

Use the POD 4 control to select the output source.
Select from:

•

ALL

(all of the output sources mentioned below)

•

BUSS/DIRECT

The 16 busses, and any direct channel

outputs

•

AUX

The eight aux sends

•

STEREO

The stereo buss

There is a second selection called

INPUT BYBASS

,

which allows you to select the same input sources as
for input routing (see “Input routing” on page 47).
These inputs are routed directly to the selected out-
puts, just like a patchbay.

TIP

These “bypass sends” can be useful for physical format
conversion, etc. For example, if you have material on a
medium that can only be output in ADAT optical, for
example, and you need it transmitted to your DAW
which has only TDIF format inputs, with no extra pro-
cessing, this feature allows you to do just that.

Slot card outputs

The second page of this screen

allows the selection of the output sources (including
the input bypass sources) and their assignment to the
outputs of the optional slot cards fitted to the DM-
3200.

The exact configuration of the outputs of the slot
cards and their use depend on the actual slot card fit-
ted, as well as the surround mode currently selected.
For example, the FireWire expansion card (software
versions after 1.0) provides up to 24 destination
channels to a DAW.

Consult the documentation relating to the appropriate
card(s) fitted to your system for details.

Figure 4.3: Routing outputs

«
...
47
48
49
50
51
...
»

Содержание DM-3200

























































































































Отзывы:

Нет отзывов

Похожие инструкции для DM-3200

Бренд: Graphite Страницы: 72

Бренд: Dynamic Страницы: 16

Бренд: Hama Страницы: 22

Бренд: Fender Страницы: 60

Studer Micro Series

Бренд: Harman Страницы: 111

Бренд: Sammic Страницы: 16

Бренд: AVE Страницы: 15

Бренд: Clatronic Страницы: 42

Бренд: M-Audio Страницы: 34

Бренд: Acoustic Control Страницы: 2

Бренд: Philips Страницы: 25

Бренд: Sound LAB Страницы: 4

Бренд: Fulltone Musical Products Страницы: 2

Бренд: Full Boar Страницы: 14

Бренд: Denon Страницы: 98

Бренд: AHB Страницы: 10

Бренд: Dunlop Страницы: 2

JHF3 BAND OF GYPSYS FUZZ FACE

Бренд: Dunlop Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды