Tascam DM-3200, Руководство пользователя

Страница: 34 / 120

2 – Basic operational concepts : Options
34
TASCAM DM-3200 Owner’s Manual
While the FADER SENSITIVITY on-screen button is
switched ON and this screen is visible, touching any
of the faders with your fingers will illuminate the
STATUS/OL indicator for as long as the fader is
touched. This provides a useful check for the sensi-
tivity of the faders.
PREFERENCES
The following general working preference settings
are available from this screen:
Fader Auto MODULE Select
When enabled,
this option allows a module to be selected whenever
its fader is touched, in addition to the usual method
of pressing the
SEL
key. In some screens, when this
option is enabled, this may only mean that the mod-
ule shown at the top left of the screen changes when
its fader is touched.
CH SOLO Key Auto MODULE Select
When
this is enabled, soloing a channel using the
SOLO
key brings up the
MODULE
screen.
Select MODULE Return
When checked, this
option allows the
MODULE
screen of the appropriate
module to appear if the SEL key of the module is
pressed and held for about two seconds.
ST Link by SEL key
When checked, this option
allows the stereo linking of two adjacent modules
(provided the left module of the pair is odd-num-
bered) by pressing and holding the
SEL key of one
module and pressing the
SEL
key of the other.
SEL Key Follows Fader Layer Status
allows
the setup of the automatic linking of the selected
channel to the selected meter layer.
When this option is selected, if a channel is selected,
the fader layer is changed, and then the fader layer is
changed back again, the originally-selected channel
is automatically selected.
For example, if this option is active, and
SEL
2 key is
lit with fader layer 1-16 active, fader layer 17-32 is
then selected,
SEL
key 3 (channel 19) is selected, and
then fader layer 1-16 is then re-selected, SEL key 2
will be active.
If the option is not active, no
SEL
key which is lit
remains lit when the fader layer is changed.
Meter Follows SEL key
When this option is
checked, the meter layer automatically changes when
the appropriate
SEL
key is pressed (see “Meters and
faders” on page 79). The modes are as follows:
Automation fader OFF
When this option is
active (checked), in automation mode, when the
automated mix is being read (played back), the faders
do not move.
Balance Level CENTER:0dB
When two chan-
nels are linked together as a stereo pair, the pan con-
trols change to a balance control. In the center
position, the level may either be set to 0dB (checked)
or a 3dB cut (unchecked).
AUX Mute follows CH Mute
When this is
checked, Aux sends from a channel are muted when
the channel is muted.
Encoder Mode Follows Current Screen
This option switches the encoder function automati-
cally (see “Encoders” on page 20) when a relevant
screen (e.g. an aux send global screen) is selected.
Current Screen Follows Encoder Mode
The converse of the previous option; when the
encoder mode is changed, the appropriate screen is
shown.
BUSS PAN Follows ST PAN
When checked,
and the BUSS PAN mode is ON, this option allows
the stereo pan channel control to control the balance
between the odd and even busses. No effect in sur-
round mode.
Figure 2.32: The PREFERENCES screen
Fader layer SEL keys Meter layer
CH 1–16 CH 1–16 CH 1–24
CH 17–32 CH 17–24 CH 1–24
CH 25–32 CH 25–48
CH 33–48 CH 33–48 CH 25–48
BUSS 1–16 BUSS 1–16 BUSS 1–16
AUX 1–8 AUX 1–8 AUX 1–8