Tascam DM-3200 Скачать руководство пользователя

Страница: 115 / 120

9 – Specifications : Messages and troubleshooting

TASCAM DM-3200 Owner’s Manual

115

●

Stored to Snapshot
Bank a-bbb

Stored a snapshot.

✔

The last stored project
cannot be found.
Create project?
Press ENTER to confirm,
or a cursor key to cancel.

At power-on, the last stored project cannot be found (maybe the card has been
changed).

✔

The current project is changed.
Store current project?
ENTER key : Store and Create
CURSOR key : Create

Changes have been made to the current project before a project creation.

✖

The project name has not been input.

An attempt has been made to create a project without giving it a name.

✖

There is no project loaded.

When storing, no project is currently loaded, so the data can’t be stored.

✖

This name is already assigned.

The name of the newly-created project already exists on the card as a project
name.

✖

This project is the current project
Can’t change.

The current project cannot be renamed

✖

This project is protected.

The project to be renamed is protected

✖

Timecode running!

An attempt has been made to create a project, etc. while timecode is still
running. Stop the timecode and try again.

✔

The current project
is not on the CF card.
Store the current project?
Cannot copy
automation data and library data
ENTER key : Store and Create
CURSOR key : Create

Confirmation that the current project should be stored on the card (it is not
already there). Automation and library data will not be stored.

●

Turn off power now.
Press ALT + STOP + PLAY to reboot.

The shutdown process is now complete, and the power can be turned off, or the
DM-3200 can be rebooted.

Action

Message

Meaning

Table 9.2: Popup messages

Содержание DM-3200

























































































































Результаты поиска

Содержание DM-3200

Отзывы:

Похожие инструкции для DM-3200

Бренды по названию

Популярные бренды

Tascam DM-3200, Руководство пользователя

Результаты поиска

Содержание DM-3200

Отзывы:

Похожие инструкции для DM-3200

Бренды по названию

Популярные бренды